Text only | Text with Images

MAINTENANCE AND MODIFICATIONS => Maintenance, Parts and Technical => Topic started by: 1HOTACR on September 26, 2008, 03:39:37 PM

Title: 08 Owners get your Permatex Blue out
Post by: 1HOTACR on September 26, 2008, 03:39:37 PM
If you haven't done a visual inspection in, out ,under, and around it may be time.  Our car is five months old and has 1500 miles now.  I have found numerous screws, bolts etc starting to back out around the car . It would be worth checking everything you can see with your eyes and reach.  Loose just one little black screw and you will be paying $3. to $9 each from Dodge.  If it came loose once it will again.  Permatex those suckers in.

   Our 04 went through  the same  thing but not as bad.

Glenn     <1
Title: Re: 08 Owners get your Permatex Blue out
Post by: ViperX on September 26, 2008, 05:07:14 PM
Yeah,

Good reminder.

I "nut and bolted" mine when they came home from the dealership.  Found many loose screws.

Now I "nut and bolt" them every oil change.  Side sill screws seem to be the worst at working themselves loose on my cars.

Dan
Title: Re: 08 Owners get your Permatex Blue out
Post by: PCH VIPER on September 26, 2008, 08:09:24 PM
Hey OGO,
Its just a matter of time before someone makes a comment about having a screw loose    ^8

But its not going to be me........     >l   
Title: Re: 08 Owners get your Permatex Blue out
Post by: Newport Viper on December 08, 2008, 11:02:16 AM
Sure enough, got it up on the lift and lots of bolts where missing. Good reminder!
Text only | Text with Images