Messages

I think you should go to a park in Ventura county after the meal.  >v

Lance I'm thinking of heading down to this event. It's a long haul for me, Can we meet up near you some were and caravan down?

Thanks guys. I ended up finding the part from s VCA member and he sold it to me for $30. I just put it in today, now I can close my window. >w

Okay here are a few photos of what I need. It's a window regulator guide for a 2000 GTS. I suspect the part is the same from any GEN II year. This is a small plastic part that it connected to the window and regulator track at the same time and actually hold the window in place.(Just the small plastic part that the cables attach to) The dealer wants me to buy a new regulator for $750 because they don't sell the part seaperately. ^11
Anybody out there that has one let me know so I can make a deal with you.

Okay here are a few photos of what I need. It's a window regulator guide for a 2000 GTS. I suspect the part is the same from any GEN II year. This is a small plastic part that it connected to the window and regulator track at the same time and actually hold the window in place.(Just the small plastic part that the cables attach to) The dealer wants me to buy a new regulator for $750 because they don't sell the part seaperately. ^11
Anybody out there that has one let me know so I can make a deal with you.

Hey guys I have a few more things I need to get rid of after my brake upgrade  >w
I have a set of front OEM brake calipers from a 2000 GTS with about 18k on them. They come with EBC red pads nearly new less than 1k on the pads, hoses and banjo bolts. All you need if you wanted to use these for a replacement or for rears. I also have front and rear aftermarket drilled and slotted rotors They are in good condition they just need to be cleaned up a bit.
Everything is on ebay but if you want anything just send me an email I would be happy to end the auction for a fellow VCA member in need. Here are the links.
2000 Viper GTS front brake calipers.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350306855414&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1182

Front rotors.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350306857079&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1182

Rear rotors
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350306861386&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1182

These have been sold but I am selling another set as well as calipers.
2000 Viper GTS front brake calipers.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350306855414&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1182

Front rotors.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350306857079&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1182

Rear rotors
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350306861386&viewitem=&sspagename=STRK%3AMESELX%3AIT#ht_500wt_1182

I'm planning on it too. Were is everyone staying this time?

Yes I have a set sitting in the garage along with the ones on the car which are drilled and slotted. Those will be replaced with the BB Stoptechs when we can get together.

Hey guys I'm cleaning the garage. I have these listed on Ebay right now. The shipping on these is going to hurt because the front and rear with the pads weigh 80lbs. These are stock rotors with 8k on them they are clean and straight. Perfect if you want to keep your car with stock parts.
Email me with any question.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350291773076#ht_500wt_1182
Scott
[email protected]

Dan,
Thanks. I'm shying away form the SRT kit. By the time I'm done buying all the parts, I can get the Stoptech kit with six piston in front and 4 in rear for basically the same price because I have a connection. That comes with everything I need. Also comes with very nice two piece rotors that are light. The six piston on front is a killer set up. I have seen it on other vipers but not taken note to see which wheels they were running and if I need spacers or not. I'm going to talk to Dc and pick their brain before I buy.
Hirk

Hey guys I bet someone out there knows the answer to this question. I am going to do a big brake upgrade on my 2000 GTS and I'm running OEM 18" wheels. Can I run the Stoptech ST-60 with 14" rotors in the front and the ST-40 with 13" in the rear. Let me know if anyone out there might be running a similar set up.
Hirk
This is the kit I'm looking at for the front.
http://raceshopper.com/brake_rotors/stoptech/st83.260.6700.shtml
These guys claim it fits. I am not buying them from here just using them for info.

Dan,
I need to pull out. I will not be able to get all my stuff together for this event. I'm working on a big brake upgrade for the GTS and I need to spend the money on that/ I'm shooting for Willow with Jim Saxton.

I just got my soccer game schedule for that day. My game is at 9:15. So My guess is I will not be there at the house. ( I can't coach my daughters team and miss the first game!) I will call Lance when I'm finished but it looks like I will not be able to make any of this.  =15
Scott & Laura Hirko

Dan,
I would like to go but only could make Sunday. Is that possible? I could drive out on Saturday and make it for dinner.
Hirko