Text only | Text with Images

VIPER DISCUSSIONS => General Viper Discussions => Topic started by: 10 BANGR on December 19, 2012, 06:57:10 PM

Title: VOLUME 17, ISSUE #6 - NOVEMBER/DECEMBER 2011 Who has One.
Post by: 10 BANGR on December 19, 2012, 06:57:10 PM
Hello there everyone,
I was wondering if any of you had this issue of Viper Mag.
I'm interested in page #37 on "How Tos"

http://www.vipermagazine.com/past-issues/index.php/products/volume-17-issue-6-novemberdecember-2011

Thanks

Demoe
Title: Re: VOLUME 17, ISSUE #6 - NOVEMBER/DECEMBER 2011 Who has One.
Post by: PCH VIPER on December 19, 2012, 08:14:39 PM
Hey Demoe,
I have it.  I'll scan it and email it to you tomorrow.
I thought you did this already.    >m
Title: Re: VOLUME 17, ISSUE #6 - NOVEMBER/DECEMBER 2011 Who has One.
Post by: ViperX on December 20, 2012, 09:45:53 AM
If this is about installing the gas cap, talk with Glenn Izard.  He did this to his vert.

If not, have fun.

Dan
Title: Re: VOLUME 17, ISSUE #6 - NOVEMBER/DECEMBER 2011 Who has One.
Post by: 1HOTACR on December 20, 2012, 05:34:57 PM
Demoe.  Glad to help.   I've installed three. When you're ready give me a shout or bring the cap to W/S Jan 5th
and I'll show you the tricks for the install... <1
Title: Re: VOLUME 17, ISSUE #6 - NOVEMBER/DECEMBER 2011 Who has One.
Post by: 10 BANGR on December 20, 2012, 06:03:53 PM
Quote from: PCH VIPER on December 19, 2012, 08:14:39 PM
Hey Demoe,
I have it.  I'll scan it and email it to you tomorrow.
I thought you did this already.    >m

I did. I just wanted to compare the process to mine.
I saw the results with the use of a template and would not recommend it as you will not
be able to see if the door is positioned correctly (radially and centered).
I used the actual door as my template. Once located it in the correct position I transferred the holes to the quarter panel.

Thanks Lance. I got you email with the attached PDF.

Demoe
Text only | Text with Images