MAINTENANCE AND MODIFICATIONS => Maintenance, Parts and Technical => Topic started by: Speedtactics on September 04, 2009, 03:41:14 PM

Title: Using Stoptech big brakes on a GTS
Post by: Speedtactics on September 04, 2009, 03:41:14 PM
Hey guys I bet someone out there knows the answer to this question. I am going to do a big brake upgrade on my 2000 GTS and I'm running OEM 18" wheels. Can I run the Stoptech ST-60 with 14" rotors in the front and the ST-40 with 13" in the rear. Let me know if anyone out there might be running a similar set up.
Hirk
This is the kit I'm looking at for the front.
http://raceshopper.com/brake_rotors/stoptech/st83.260.6700.shtml
These guys claim it fits. I am not buying them from here just using them for info.
Title: Re: Using Stoptech big brakes on a GTS
Post by: ViperX on September 05, 2009, 04:09:02 PM
Hey Scott,

You should talk to JonB at Partsrack.  He will know the answer.

The best way to go is Dave's kit with SRT-10 brakes all around but I don't think the rears will fit with OE wheels.  I have a set of used SRT Rotors that I'll give you if you go this way and want them. 

I think you can go SRT-10 brakes up front then take your GTS fronts and swap them to the rear.  I think Ben Kawata did this last year.  Lance will know as he helped with the install.  Saves a few Pesos and gives you a very good braking system for the bucks.  I think they'll fit OE wheels too.

I do think the Stoptech kits that you describe will fit.

See you at the track,

Dan
Title: Re: Using Stoptech big brakes on a GTS
Post by: Speedtactics on September 08, 2009, 11:06:22 AM
Dan,
Thanks. I'm shying away form the SRT kit. By the time I'm done buying all the parts, I can get the Stoptech kit with six piston in front and 4 in rear for basically the same price because I have a connection. That comes with everything I need. Also comes with very nice two piece rotors that are light. The six piston on front is a killer set up. I have seen it on other vipers but not taken note to see which wheels they were running and if I need spacers or not. I'm going to talk to Dc and pick their brain before I buy.
Hirk
Title: Re: Using Stoptech big brakes on a GTS
Post by: ViperX on September 08, 2009, 05:11:01 PM
I'd ask around on the six piston kit for GTS.  Make sure the GTS master cylinder will work with the six piston setup.  I know a few guys who've tried it and didn't like it.

If I were going Stoptech up front, I'd stick with the 4 piston set up, especially without ABS.

Good luck,

Dan
Title: Re: Using Stoptech big brakes on a GTS
Post by: Speedtactics on March 03, 2010, 09:53:23 PM
Here is the thread from the VCA forum and the instal photos on the big brake kit.
For anyone who has a Gen I or Gen II and are thinking about brake upgrades this is for you.
Plus bonus Photos of the Flying Hawaiian installing brakes and grinding suspension!
http://forums.viperclub.org/rt-10-gts-discussions/629552-using-stoptech-big-brakes-2000-gts.html