>1
Another great product from Dave's Big Brakes >r
These new S/S short Shifter rods come with an adjustable collar ring & zip tie to seal off the hot air from below the shifter boot. Their are 3 sizes
DVS-032 1" drop lower than OEM
DVS-032A 2" drop lower than OEM
DVS-032B 1" drop using an aftermarket shifter knob
Easy install and come with a new jam nut, allen wrench, and a zip tie for the lower boot seal.
Designed by a 4 time Viper owner, current Viper a 2008 cpe, with help from OGO ( Oh Great One) it's almost to pretty to install >v
DVS-032 $59.95
www.davesbigbrakes.com
858-382-4713 cell
<2
Check out the new up graded pictures in the first thread for different knobs and showing different combo heights on the knobs.
Lots of choices now.
Big Brake Dave <2
>u >u
A few more different handles & height >m
www.davesbigbrakes.com
858-382-4713 cell
What was I thinking!
=17
I was at A & C Perfomance in Murretta..... I should have had them put one of these in with my new clutch!
Hey OGO O> ,
Getting the OE shifter bottom with the rubber isolator can be a bit tricky in the car.
Any tips?
D <2
Remove the belly pan to remove the black isolater from below is th easiest, otherwise you have to remove console and drill out the rivets from the top.
Testing my animated logo's >u
OGO