08 Owners get your Permatex Blue out

Started by 1HOTACR, September 26, 2008, 03:39:37 PM

Previous topic - Next topic

1HOTACR

If you haven't done a visual inspection in, out ,under, and around it may be time.  Our car is five months old and has 1500 miles now.  I have found numerous screws, bolts etc starting to back out around the car . It would be worth checking everything you can see with your eyes and reach.  Loose just one little black screw and you will be paying $3. to $9 each from Dodge.  If it came loose once it will again.  Permatex those suckers in.

   Our 04 went through  the same  thing but not as bad.

Glenn     <1
Glenn
1HOTV10 - 2014 GTS Striker Green
1HOTACR - 2017 ACR-E

ViperX

Yeah,

Good reminder.

I "nut and bolted" mine when they came home from the dealership.  Found many loose screws.

Now I "nut and bolt" them every oil change.  Side sill screws seem to be the worst at working themselves loose on my cars.

Dan

PCH VIPER

Hey OGO,
Its just a matter of time before someone makes a comment about having a screw loose    ^8

But its not going to be me........     >l   
www.kouchicentral.com  for more viper pictures

Newport Viper

Sure enough, got it up on the lift and lots of bolts where missing. Good reminder!
04 SRT-10